FMCA COMMERCIAL MEMBER C10005
MOTORCYCLE PICKUP TRUCK BED LOADER
The Cruiser Ramp Motorcycle Pickup Loader was designed to be a cost effective way to load and transport a full size motorcycle in the bed of a pickup truck. The Cruiser Ramp system will accommodate all full size pickups. The motorcycle pickup loader eliminates the use of boards, and backing the pickup into a ditch to load the motorcycle. Simply drive the motorcycles front wheel into the locking wheel chock on the system platform assembly, tie the front wheel down at the axle position using the supplied ratchet tie-down straps, activate the hand held remote switch and the motorcycle is pulled into the pickup bed. The pickup loader is powered by a 3000 pound capacity electric winch with 3/16" wire rope heavy duty cable.
The Cruiser Ramp system will accommodate the standard 5'-6", 6'-6", and 8' bed lengths with 48" clearance between the wheel wells which includes step side model pickups. The Cruiser Ramp system allows for the tailgate of the pickup to be closed with the motorcycle removed on the 5'-6" and 6'-6" models. The tailgate may also be closed with the 8' bed model with the motorcycle loaded or removed from the bed. The motorcycle may be loaded into a 8' bed with or without the tailgate attached. The system is easy to install and dismantle. The The Cruiser Ramp mechanism removes the motorcycle from the bed without having to pull the motorcycle out by hand. This is done without using multiple winches and complicated electronic switching. The ramps store within their own holders along the side of the pickup bed. The holders just drop into the stake bed holes within the pickup bed rail. They may be trimmed in order to lower the ramps as far as possible within the bed.
CRUISER RAMP PICKUP LOADER
P.O. Box 654, Katy, Texas 77492-0654
Toll Free: (866) 794-8357 Tel: (281) 391-6750 Fax: (281) 391-6533 Email: firstname.lastname@example.org